As your other electric appliance needs proper maintenance and care services, so do the hot water storage tanks. Although the hot water tank manufacturers make them by using solid material to deal with different levels of heating. But, due to continuous usage, the tanks are prone to damage. Moreover, if you maintain your hot water tanks by following some tips and tricks, you may extend their life. In this article, you will get some tips on how to take care of your water heater tanks. 

Points To Remember While Maintaining Your Hot Water Storage Tanks 

• Keep Checking The Anode Rod That Is inside The Storage Tank During Winter

The large-sized hot water heating tanks have anti-corrosion features. You can easily see an anode rod inside your storage tank. This rod is basically used to attract impurities from water. Therefore, it saves the storage tank from getting rusty. The Certified Plumber or hot water technicians suggest everyone replace the anode rod every three years. 

In case, you observe nearly six inches of magnesium layer, this means it needs to be replaced. Otherwise, if everything seems fine, you may use it for the next 6 months or more. Keep checking this rod more often in the winter season. 

• Space Around The Hot Water Storage Tanks 

Whenever you wish to set up a hot water heater, make sure you leave some space between the storage tank and the wall. This will help in making the service for the future easy. For instance- when you appoint a technician to repair it in the future, he will get enough space to check out the connection points and hot water heater parts. In addition to this, it is advisable to put storage tanks on the wall instead of placing them near the bathing or toilet area. So that it does not get in contact with water from outside.

• Place The Hot Water Tank At Certain Height 

According to hot water heater manufacturers, the accurate height of placing a hot water tank is 6 feet or 1.8 meters from the ground level. This will ensure that the pressure of water is exact. This further allows you to have a continuous flow of hot water rather than breaking or trickling. 

• Electrical Switches And Connections

To ensure that the hot water heater and storage tank are attached with an MCB ( Miniature Circuit Breaker) that will cut off the main connection at times of electric fluctuations. This will save your hot water heater and tanks from facing short circuits. Additionally, install the hot water heater switches at a height that only allows adults to reach them. 

• Never Leave The Hot Water Heater Switches On For Longer Periods 

People often leave their hot water heaters on for a longer time. There may be many reasons to do this. If you have a busy schedule in the morning you may forget to turn off your hot water heater. If so, the hot water heater connects and disconnects automatically. This process continues till you switch it off. By this time, your hot water tanks are most affected. The water that is not in use is getting cold and hot again. This will remove all the calcium and impurities from water and they get stuck on the inner walls of the tank.

• Save Electricity By Decreasing The Temperature 

Hot water storage tank maintenance is necessary. As this will help you in saving a lot on electricity bills. When you keep your hot water heater set at a lower level, the water will reach the level quickly and get transferred from tank to tap soon. Lowering the hot water level tip is best suitable for nuclear families. Also, keep calling professional hot water technicians to regularly clean your storage water tanks. 

• Change The Plastic Outlet and Inlet Pipes With Metallic Ones

It is always a good idea to use metallic outlets and inlet pipes rather than plastic ones. This is because metal is more resistant to heat than any other plastic pipe. So, even if you get plastic pipes free with hot water storage tanks, do replace them with metal ones. Moreover, do not forget to check the joints of piping at regular time intervals. As the whitish deposits are seen, call a professional hot water plumber to clean it. 

• Checkout The Pressure Releasing Valve 

In order to keep your storage hot water tanks well maintained, do check your pressure release valve at least once a year. You can easily check their work by imparting a little pressure a few times. In case the water is leaking then it can be a serious problem. If you are having an incorrect pressure releasing valve then try this out drain a little water out of the tank and detach the discharge valve. After some time, replace the valve! 

• Keep Checking Your Plugs

In case you are using low-quality electric wires for connections of hot water heaters. Or if your place often experiences power fluctuations, then keep a check on your hot water heater plugs. You may observe darker burning marks on the plug if there is high wattage current passing through it. If so, seek professional hot water heating technician help. 

Get The Finest Hot Water Heater Services From Us 

You may follow the above-mentioned tips and tricks to maintain your hot water heating tanks. In case you have less or no idea of doing hot water heater and storage tanks repair, do not hesitate to call us. Hot Water Sydney provides superior quality hot water heater and storage tanks cleaning and maintenance services. Our services have been rated as the number one in the entire Sydney. 

We want you to schedule us for annual inspection and maintenance services for your hot water heater. Our service charges are competitive and fair. Our company has greatly invested in modern-day machinery and tools for excellent service.